<thead id="yefzu"><tt id="yefzu"><video id="yefzu"></video></tt></thead>
<optgroup id="yefzu"></optgroup>

<font id="yefzu"><del id="yefzu"></del></font>

<object id="yefzu"><option id="yefzu"><big id="yefzu"></big></option></object>
<optgroup id="yefzu"><del id="yefzu"><tr id="yefzu"></tr></del></optgroup><delect id="yefzu"><option id="yefzu"><big id="yefzu"></big></option></delect>
<delect id="yefzu"><option id="yefzu"></option></delect>


    当前位置: 首页 > 仪器设备 > UL1598灯具产品测试仪器


    • 型号 : AGS3332
    • 品牌 : 广东安规
    • 标准依据 : UL1574第53.4节及图53.1




    53.4.1 The track lighting system assembly to be tested is to consist of three intercept connector samples, two feed connector samples, one luminaire assembly sample, and four 20 inch (0.51 m) long sections of track. The connectors and luminaire assembly samples are to be of the models with the highest measured resistance as specified in 53.2.1. The electrical fittings are to be assembled as shown in Figure 53.1 and mounted to one side of a plywood test ceiling consisting of 1/2 inch (12.7 mm) thick Grade A – C or A – D plywood of such dimensions that the plywood extends at least 1 foot (305 mm) beyond each portion of the network and luminaire assembly. A 4 inch by 1-1/2 inch deep octagonal trade size standard metal outlet box is to be secured inside a wooden box by screws through the back of the outlet box. The wooden box is to be constructed of 2 inch by 4 inch trade size pine. The inside dimensions of the wooden box are to be 4 inches by 3-7/8 inches by 1 inch (102 mm by 98.4 mm by 25.4 mm). The wooden box is to be mounted to the plywood over a 4 inch by 4 inch opening. Each section of track is to be secured to the plywood by two wood screws through openings, each of which is:
    a) 3 inches (76.2 mm) from the end of a track section; or b) 1/2 inch from the connector in the end of the track; whichever is the greater distance from the end. The feed connector is to be mounted to or over the outlet box. The side of the plywood to which the track system is not mounted is to be completely covered with a layer of foil-faced R19 glass fiber batt insulation with the non-foil-faced side of the insulation facing the plywood test ceiling. The plywood surface is then to be suspended or supported so that a simulated ceiling mounting of the track assembly results.  
    Exception: If, as a result of measuring the resistance of the intercept connectors, a right or left turn intercept connector is determined to have the highest resistance and is to be subjected to the grounding resistance test, two right and one left intercept connector samples may be tested in the test assembly.
    点击次数:  更新时间:2017-09-11  【打印此页】  【关闭
    销售工号303 销售工号303
    销售工号373 销售工号373
    销售工号973 销售工号973
    技术fasten 技术fasten

    苍井空av作品 男人天堂,看你想看| 青青草原久久免费观看| 人妻凌辱| 三级片有哪些| 苍井空微博| 成人小游戏| 欧美亚洲小说图片图专区| 美女自慰图| 自拍日本| 午夜理论2019理论|